Shop DynaVap
The DynaVap Devices We Carry
Same click, same heating method, same lifetime warranty across all three. What changes is the length, material and what you can attach it to.
The M 7
The flagship, and the one most people should buy first. Medical-grade stainless steel, a 0.1 g tip, a notched dose chamber, and adjustable airflow through the mouthpiece. It fits 10 mm water pieces if you want to run it through glass later. If you are buying one DynaVap and you want the version everybody is talking about, this is it.
The M 7 XL
The M7 with a longer body. The extra length puts more distance between the hot tip and your mouth, which means the vapor arrives cooler, and it gives you more comfortable real estate to hold while the cap is still hot. Same 0.1 g tip, same stainless build, same 10 mm compatibility. Buy this one if you found the standard M7 a little short in the hand or a little warm on the draw.
The VonG X
Stainless steel and titanium, and the most solidly built device in the line. The reason to choose it over the M7 is water: the VonG X works with both 10 mm and 14 mm joints, so it drops straight into most bongs and bubblers without an adapter. If you already own glass and you want your dry herb device to live in it, start here.
The DynaCoil
A titanium coil that sits inside the tip and lets the same device handle wax and oil. Worth knowing: without the DynaCoil, DynaVap devices are dry herb only. With it, one device covers both. It fits across the line.
DynaStash XL & DynaStash ER
Hardwood stands that hold the device upright with a magnet, keep the cap and tip together, and stop a hot device from rolling off a table. We stock the XL in Wenge and the ER in Movingui. They are the piece people skip and then buy three months later.
How a DynaVap Works
Four easy moves, and it is the same every time. Just rinse and repeat.
- Grind your herb, finer than you would for a bowl, and pack the tip lightly rather than cramming it.
- Put the cap back on the tip.
- Heat the cap with a torch or an induction heater, rotating for even coverage, until you hear a click.
- Inhale slowly. A second click on the way down tells you the cap has cooled and the device is ready to heat again.
That click is a bimetallic disc inside the cap. It flexes at temperature, which is what gives you a consistent, repeatable heat with no screen, no app and nothing to calibrate.
Torch or Induction Heater?
Every DynaVap needs an outside heat source. There are two ways to do it, and the choice matters more to your daily experience than which device you pick.
Butane torch. Cheapest way in and the most portable. You hold the cap just above the flame and rotate the device until it clicks. It takes a handful of sessions to learn the rotation, and results vary with how steady your hand is. No batteries, works anywhere.
Induction heater. Drop the cap into the coil and the heater brings it up evenly and repeatably, no flame and no butane. It is the upgrade people make after a few weeks with a torch, and it is the single biggest change you can make to session consistency. We stock the YLL 3.0 Induction Heater, and the Molicel P42A 21700 battery pair that powers it.
Running a DynaVap Through Water
This is where a DynaVap stops being a one-hitter and turns into a full setup, and it is the part most shops gloss over.
Every device in the line is built to sit in a water piece. The M7 and M7 XL take a 10 mm female joint; the VonG X handles 10 mm and 14 mm. Water pulls a noticeable amount of heat out of the vapor before it reaches you, and it is the cheapest upgrade in the whole hobby, you likely already own the glass.
What we stock to get you there:
Water pipe adapters
10 mm female, 14 mm male and 19 mm male, clear and colored, so a DynaVap fits whatever joint your piece already has.
Freeze Pipe DNA
A compact glycerin piece built for exactly this, freeze the coil, drop the device in, and the vapor lands cool.
Magma Industries Sapphire
Glycerin and water filtration in one chamber. Freeze it dry, fill it after, run vapor through it.
Elev8 All-Glass Vapor Tamer
An all-glass cooling pathway with no plastic in the airflow, for anyone who does not want anything but glass between the tip and the mouthpiece.
One device and a way to heat it. The M7 plus a torch gets you consuming for the lowest total spend, and nothing here gets orphaned when you upgrade later.
Device, DynaStash to keep the cap and tip together, a grinder and a smell-proof case. The whole thing fits in a bag pocket with no cords, no batteries and nothing that dies on you halfway through a trip.
Device, YLL 3.0 induction heater with the Molicel battery pair, a water piece and the right adapter, plus a stash jar. This is the version people end up at eventually, repeatable heat, water cooling, and a spot on the table for all of it.
Cleaning and Care
A DynaVap that tastes off is almost always a DynaVap that needs a clean, not a broken one.
- After a few sessions: pull the tip and cap apart and wipe the visible residue with isopropyl alcohol on a cotton swab.
- Deep clean: soak the metal parts in 91%+ isopropyl alcohol, rinse thoroughly with water, and dry completely before reassembly.
- Leave the o-rings out of long alcohol soaks. They are wear parts, they are inexpensive, and they are meant to be replaced.
- Never soak wood. Wipe DynaStash stands and any wooden midsection with a dry or barely damp cloth only.
The upside of no electronics: there is nothing in a DynaVap you can ruin by cleaning it properly.
Where to Buy a DynaVap
Moonlit Supply is Seattle-born and online only. We ship DynaVap devices, parts and accessories anywhere in the United States, in discreet packaging with a "MS CO" identifier on the label and nothing else. Shipping is free on orders over $100.
If you are searching for a DynaVap near you in Seattle, Bellevue, Tacoma, Olympia, Spokane or anywhere else in Washington, ordering from us is usually faster than driving to a shop and finding out they only stock one model. If you are outside Washington, the same catalog and the same shipping apply.
Earn on Every DynaVap Order
Every order earns points through the Moonlit Risers program, redeemable on future purchases, and members hear about restocks and new colorways first, which matters on parts that rotate. Signing up takes about a minute.
Know More. Consume Better
Ready to take your DynaVap further? Our guide to building the ultimate smooth-hit vaporizer setup walks through cooling, water filtration and the attachments that make every draw smoother. The blog is home to more tips, guides and honest insights on health-conscious consumption.
